Cold drawing equipment & tooling
Drawing equipment, straightening machines and process tooling, selected around your material and finished product.
Explore equipmentDrawing · Straightening · Surface finishing
Our equipment
Explore individual machines and complete line enquiries. Start with your material, input size and required finished section.
01 / Diameter reduction
Inverted, straight-line and wet drawing equipment.
View details →02 / Process integration
Combined drawing, straightening and cutting lines.
View details →03 / Surface condition
Shot blasting, descaling and abrasive belt finishing.
View details →Drawing dies & tooling
Round, square, hexagonal and special-profile drawing dies, copper-processing tooling, rollers and wear parts. Compare tooling by process and send a drawing for a specification review.
Planning your process
A useful equipment or tooling quotation begins with the details of the workpiece.
Grade, condition, strength and incoming dimensions.
Section drawing, dimensional tolerance, straightness and surface finish.
Required output, line layout, utilities and material handling.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
About uniBesco
Foshan Unibesco Trading Co., Ltd. · Foshan, Guangdong, China.
uniBesco supplies drawing equipment, straightening and finishing machines, drawing dies and wear-resistant tooling for bars, wire and profiles.
Equipment enquiries are reviewed against the material, incoming and finished dimensions, production requirements and available layout. Tooling enquiries are checked against drawings, die dimensions and operating conditions.
Working with uniBesco
Share the material and application before selecting the equipment or die.
Material grade, condition and the finished product you need.
Input size, final section, tolerances and process drawing.
Equipment, tooling, quantity, documentation and destination.
Start with your specification
Send the material, input and finished dimensions, required output and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Foshan, Guangdong, China
Contact uniBesco
Equipment, drawing dies and wear-part enquiries.
Start with your specification
Send the material, input and finished dimensions, required output and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Foshan, Guangdong, China
Company contact
Please contact us before arranging a visit.
Foshan Unibesco Trading Co., Ltd.
No. 97-5, Songgang Shannan Street Head Industrial Zone, Shishan Town, Nanhai District, Foshan City, Guangdong, China.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 01
Coated drawing dies for wire reduction, selected to suit the wire material and drawing conditions. The working bore, entry profile and casing must match the drawing schedule and die holder.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Coating composition, substrate and suitability are confirmed with the quotation. The product name does not imply a particular coating chemistry or a guaranteed service-life increase.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 02
Diamond drawing dies for wire-size reduction. Selection starts with the wire material, finished diameter and pass schedule, followed by the working profile and mounting dimensions.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Confirm whether the specified die uses natural diamond, synthetic single-crystal diamond or polycrystalline diamond. These materials are not interchangeable specifications.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 03
Round and shaped tooling for copper processing. Extrusion and drawing involve different loading and process conditions, so the required operation must be identified before the tool is specified.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Rectangular and other profile apertures are specified against a dimensioned drawing. Suitability for an extrusion press is reviewed separately from drawing-machine compatibility.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 04
Associated tooling components for copper extrusion equipment. A replacement component must fit the existing tooling assembly and its machine interface; a photograph alone cannot establish compatibility.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
The illustrated component is a reference for the existing product family. The component function, material and final geometry are confirmed from the application drawing.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 05
Drawing and forming tooling supplied to an agreed part drawing. Clarify the actual forming operation, workpiece material and machine interface before selecting a die or replacement insert.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
The original catalogue uses the term stretch mold. This is a broad description, so the intended operation is checked rather than assuming a sheet-metal, tube or wire application.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 06
Tooling enquiries for powder compaction and related powder-metallurgy operations. The die cavity, punch arrangement and press interface are reviewed together with the component drawing.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Tool material, clearances and suitability for a particular compaction process require an application review. No universal press-tonnage or service-life rating is implied.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 07
Roller tooling for metal-processing applications, specified around the groove profile, product section and mounting arrangement. Replacement roller enquiries should include both the working profile and the assembly interface.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
The existing photograph shows a roller assembly. Confirm whether the enquiry covers individual carbide rollers, inserts or the complete assembly.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 08
Wear components for applications requiring an agreed balance of wear resistance and toughness. Geometry and material selection depend on the contact conditions and the way the component is supported.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Carbide grade, binder composition and hardness are confirmed for the application. A generic wear-part description does not establish suitability for every operating environment.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 09
Peeling tooling for removing a surface layer from brass stock. The incoming section, required removal and finished surface requirements determine the working geometry and setup.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Peeling is a material-removal operation and should not be confused with reducing a bar through a conventional drawing die.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 10
Profile drawing dies for square and hexagonal sections. Across-flats dimensions, corner radii and orientation must be defined alongside the casing dimensions and drawing schedule.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
The product photograph shows a hexagonal aperture. Square-profile tooling is specified separately and is not represented by changing the pictured hole.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 11
Drawing dies for non-round sections defined by a component drawing. The profile, corner details and transition between passes are reviewed to suit the starting stock and required finished section.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Profile geometry is drawing-specific. A visual reference is not a substitute for confirmed dimensions or an agreed drawing schedule.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Product reference · Final tooling follows the agreed drawing.
PROCESS TOOLING / 12
Round drawing dies for reducing wire or bar to a specified diameter. The working profile and casing dimensions are reviewed against the material, reduction per pass and drawing-machine setup.
Discuss this tooling ↗SPECIFICATION REVIEW
APPLICATION NOTES
Diameter capability, tooling material and inspection limits are confirmed for each requirement. Numbers engraved on a reference photograph do not define the full available range.
Please include a dimensioned drawing or sample reference. We will review the tooling scope and confirm the specification with the quotation.
Cold drawing equipment
Browse drawing, straightening, surface preparation and material handling equipment. Choose a process, then review its specification.
Wire drawing
Single-block vertical drawing equipment combining wire reduction with coil handling below the drawing block. Review the wire size, reduction and collection arrangement around your process.
View details →Wire drawing
Multi-block wire drawing lines with successive drawing stages arranged in series. The pass schedule, capstan arrangement and wire handling are selected for the starting material and finished wire.
View details →Wire drawing
Wet drawing equipment for wire reduction with liquid lubrication and cooling. The drawing arrangement and lubricant system are reviewed against the wire material, reduction schedule and required surface condition.
View details →Straightening & finishing
Equipment for converting coiled wire into straight cut lengths. Selection considers the material strength, wire diameter, straightness and cut-length requirements as well as the handling of finished pieces.
View details →Bar & profile
Drawing, straightening, shearing and collecting stages for bars and profiles.
View details →Surface preparation
Shot blasting, descaling, belt cleaning and bar polishing.
View details →Auxiliaries
Coil and spool handling around your drawing process.
View details →Auxiliaries
Prepare and join wire ends for downstream drawing.
View details →Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Bar & profile equipment
Representative configuration. Final equipment and colour are confirmed with the order.
Wire drawing
Wire drawing equipment for reducing high-carbon steel wire through a specified pass schedule. Selection depends on the wire grade, starting strength, finished diameter and required downstream properties.
Discuss this equipmentSpecification review
Wire grade, inlet strength and diameter, finished diameter, number of passes, lubrication, cooling and take-up requirements.
Catalogue range
| Maximum inlet diameter | 16 mm |
|---|---|
| Maximum inlet tensile strength | 1,700 MPa |
| Capstan diameter range | 560–1,400 mm |
| Minimum finished diameter | 2 mm |
| Maximum finished tensile strength | 2,700 MPa |
Catalogue limits refer to the available range. Maximum values do not necessarily apply together to one configuration.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Wire drawing
Multi-pass drawing lines for low-carbon steel wire. The line configuration combines the reduction schedule with feeding, lubrication, cooling and finished-wire handling requirements.
Discuss this equipmentSpecification review
Starting wire condition, target diameter, production rate, reduction schedule, lubricant and coil or spool format.
Catalogue range
| Inlet diameter range | 5–8 mm |
|---|---|
| Finished diameter range | 1.2–7 mm |
| Maximum drawing blocks | 16 |
Catalogue limits refer to the available range. Maximum values do not necessarily apply together to one configuration.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Wire drawing
Single-block vertical drawing equipment combining wire reduction with coil handling below the drawing block. Review the wire size, reduction and collection arrangement around your process.
Discuss this equipmentSpecification review
Material and tensile strength, incoming and finished diameter, required reduction, coil dimensions and weight, drawing speed and available floor space.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Wire drawing
Multi-block wire drawing lines with successive drawing stages arranged in series. The pass schedule, capstan arrangement and wire handling are selected for the starting material and finished wire.
Discuss this equipmentSpecification review
Wire grade and strength, incoming and finished diameter, number of passes, target output, lubrication, cooling, tension control and take-up format.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Material options
Representative configuration. Final equipment and colour are confirmed with the order.
Wire drawing
Wet drawing equipment for wire reduction with liquid lubrication and cooling. The drawing arrangement and lubricant system are reviewed against the wire material, reduction schedule and required surface condition.
Discuss this equipmentSpecification review
Wire material, inlet and finished diameter, reduction schedule, target speed, lubricant, cooling requirements, number of passes and take-up format.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Straightening & finishing
Equipment for converting coiled wire into straight cut lengths. Selection considers the material strength, wire diameter, straightness and cut-length requirements as well as the handling of finished pieces.
Discuss this equipmentSpecification review
Wire material and strength, diameter, cut length, length tolerance, straightness, production rate and collection method.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Before drawing & after drawing
Shot blasting, mechanical descaling, abrasive belt cleaning and bar polishing, specified for the material and required surface condition.
Mechanical descaling equipment for removing scale from wire or rod before subsequent processing. The method must suit the material surface condition and downstream finish requirements.
For a quotation: Material grade, wire diameter, scale condition, line speed, surface acceptance requirements, dust collection and line integration.
Descaling equipment listed for hydraulic configurations. The working method and line arrangement are reviewed against the incoming material and required surface preparation.
For a quotation: Rod grade and diameter, incoming scale condition, required process method, output, utility supply and line interface.
Surface-cleaning equipment for preparing steel wire or bar for downstream processing. The appropriate cleaning method depends on the contamination, scale and final surface condition required.
For a quotation: Material grade and dimensions, incoming surface condition, target finish, line speed, cleaning method and integration requirements.
Shot blasting equipment for removing rust and mill scale from wire rod before drawing. Review in-line processing and coil-treatment arrangements against the actual feedstock and production sequence.
For a quotation: Wire material and diameter; coil or continuous-feed format; scale condition; line speed; target surface condition; abrasive circulation and dust-extraction requirements.
Pass-through shot blasting equipment for cleaning the outside surface of straight bars. The material section, feeding arrangement and required cleaning result determine the appropriate configuration.
For a quotation: Bar grade; round or shaped section; section size and length; incoming scale or rust condition; required surface condition; throughput; loading and discharge arrangement.
Abrasive belt equipment for surface cleaning of wire or rod before further processing. The belt arrangement and abrasive selection are reviewed around material removal, feed speed and the required surface condition.
For a quotation: Wire material and diameter; surface condition; removal allowance; line speed; abrasive belt specification; finished surface requirement and dust collection.
Belt grinding and polishing equipment for the external surface of round bars. Specify whether the objective is scale removal, defect removal, dimensional stock removal or cosmetic finishing, as these require different process settings.
For a quotation: Material and diameter; bar length; removal allowance; required roughness or reference finish; dimensional tolerance; feed rate; dry or wet processing preference and handling arrangement.
Wet surface polishing equipment for finished wire, using circulating water around the abrasive finishing process. Define the required finish, material removal and downstream coating or storage conditions.
For a quotation: Material and wire diameter; incoming surface; target finish; allowable material removal; line speed; water circulation and filtration; drying and corrosion-protection requirements.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Material handling
Match coil and spool handling to the material, production speed and line arrangement.
Take-up equipment for receiving processed wire in an agreed spool or coil format. The take-up must suit the wire stiffness, line speed and control interface of the upstream process.
For a quotation: Wire diameter and strength, line speed, spool or coil dimensions and weight, winding pattern, tension control and line interface.
Pay-off racks for feeding wire into downstream processing equipment. Coil support and the loading arrangement are reviewed against coil dimensions and operating requirements.
For a quotation: Coil dimensions and weight, material, feeding speed, loading method, tension requirements and floor layout.
Horizontal pay-off equipment for controlled feeding of coiled wire or rod. Configuration depends on the coil format, the material and the required connection to the processing line.
For a quotation: Coil outside and inside diameter, width, weight, material, line speed, loading and tension requirements.
Reel-type pay-off equipment for coil feeding. Specify the reel or coil interface and operating duty so that the support, braking and control arrangements can be reviewed.
For a quotation: Reel dimensions and weight, wire grade and diameter, feeding speed, braking requirements and upstream handling.
Double-station hydraulic overturn pay-off equipment for loading and presenting wire coils to a processing line. Review the coil handling sequence and required station arrangement.
For a quotation: Coil size and weight, loading method, changeover sequence, line speed, feeding direction and available space.
Decoiling equipment for supplying wire or rod from coils to a processing line. Select the coil support and handling arrangement around the product size, coil weight and downstream demand.
For a quotation: Material, wire or rod dimensions, coil dimensions and weight, required feeding speed, loading method and line layout.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Drawing line auxiliaries
Preparing and joining wire ends for the next drawing operation.
Butt welding equipment for joining wire ends during processing. Selection is based on the wire material, cross-section and the required joint condition for the next operation.
For a quotation: Wire material and diameter, joining requirements, subsequent drawing schedule, power supply and required handling arrangement.
Pointing equipment for preparing wire or rod ends for entry into a drawing die. The required pointed length and final end size depend on the die and drawing-machine gripping arrangement.
For a quotation: Material and strength, incoming diameter, required pointed diameter and length, die opening, feeding method and working cycle.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Drawing dies & process tooling
Browse coated and diamond drawing dies, round and shaped dies, copper-processing tooling, rollers and wear parts.
Tooling
Coated drawing dies for wire reduction, selected to suit the wire material and drawing conditions. The working bore, entry profile and casing must match the drawing schedule and die holder.
View details →Tooling
Diamond drawing dies for wire-size reduction. Selection starts with the wire material, finished diameter and pass schedule, followed by the working profile and mounting dimensions.
View details →Tooling
Round and shaped tooling for copper processing. Extrusion and drawing involve different loading and process conditions, so the required operation must be identified before the tool is specified.
View details →Tooling
Associated tooling components for copper extrusion equipment. A replacement component must fit the existing tooling assembly and its machine interface; a photograph alone cannot establish compatibility.
View details →Tooling
Drawing and forming tooling supplied to an agreed part drawing. Clarify the actual forming operation, workpiece material and machine interface before selecting a die or replacement insert.
View details →Tooling
Tooling enquiries for powder compaction and related powder-metallurgy operations. The die cavity, punch arrangement and press interface are reviewed together with the component drawing.
View details →Tooling
Roller tooling for metal-processing applications, specified around the groove profile, product section and mounting arrangement. Replacement roller enquiries should include both the working profile and the assembly interface.
View details →Tooling
Wear components for applications requiring an agreed balance of wear resistance and toughness. Geometry and material selection depend on the contact conditions and the way the component is supported.
View details →Tooling
Peeling tooling for removing a surface layer from brass stock. The incoming section, required removal and finished surface requirements determine the working geometry and setup.
View details →Tooling
Profile drawing dies for square and hexagonal sections. Across-flats dimensions, corner radii and orientation must be defined alongside the casing dimensions and drawing schedule.
View details →Tooling
Drawing dies for non-round sections defined by a component drawing. The profile, corner details and transition between passes are reviewed to suit the starting stock and required finished section.
View details →Tooling
Round drawing dies for reducing wire or bar to a specified diameter. The working profile and casing dimensions are reviewed against the material, reduction per pass and drawing-machine setup.
View details →Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Coil-feeding equipment for drawing lines. Review the coil dimensions, material and required feeding arrangement before selecting the decoiler.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Initial straightening equipment for preparing wire, rod or profiles for subsequent drawing. Configuration depends on section geometry and material condition.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Combined drawing equipment integrating coil opening, initial straightening, drawing, precision straightening, cutting and collection. Select the required process stages around the finished bar or profile.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Catalogue range
| Catalogue models | LHJZ-2 / -4 / -6 / -8 / -10 / -15 / -20 |
|---|---|
| Rated drawing force | 20 / 40 / 60 / 80 / 100 / 150 / 200 kN |
| Drawing speed | 5–60 m/min for LHJZ-2 to -10; 5–50 m/min for -15 and -20 |
| Finished length | 2–6 m, ±5 mm (catalogue reference) |
Catalogue limits refer to the available range. Maximum values do not necessarily apply together to one configuration.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Roller straightening equipment for drawn material. The roller arrangement is reviewed against the section, material strength and required finished straightness.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Two-roll straightening equipment for round bars. Select the roller setup and material handling to suit the bar diameter, strength and surface requirements.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Hydraulic shearing equipment for cutting processed material to specified lengths. Review the material section and strength, cut-length requirements and connection to the upstream line.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Guiding and supporting equipment for moving material between processing stages. The support arrangement is matched to the section, length and line layout.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Collecting equipment for receiving finished straight lengths from a drawing or finishing line. Define the product length, section and bundling or transfer requirements.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
Representative configuration. Final equipment and colour are confirmed with the order.
Bar & profile drawing
Surface finishing equipment for round bars. Specify the incoming surface condition, required finish and removal allowance to determine the appropriate polishing arrangement.
Discuss this equipmentSpecification review
Material grade and condition, incoming and finished section, dimensional tolerance, straightness, surface condition, required output, handling method and line layout.
Configuration
Capacity, drive power, dimensions and line speed depend on the material and selected configuration. Include your target output and process requirements with the enquiry.
Discuss your requirement
Send the material, incoming and finished dimensions, production requirements and any drawings.
info@unibesco.cnWhatsApp: +86 138 2773 0205
